|
| Melancon No. 007* Wonder Seal (100% Synthetic) Contains NO Teflon® or Solids |
EMERGENCY Valve Sealant specially formulated for use in Plug, Ball or Gate type valves. It performs extremely well as a sealant on plug, ball or gate valve applications; anywhere sealing surfaces have been damaged, including pipeline valves, wellheads, compressor stations & refineries. It has been widely used on Pig Receiver valves, Suction and Discharge valves.
Features: - 007 has extraordinary sealing capability for valves with internal seat leakage.
- It will not dry out or harden in the valve.Valves remain operational after Sealing.
- It contains NO solid fillers and is water insoluble.
- High metal adhesion with inhibitors for H2S and excellent corrosion resistance.
- Suitable for Natural Gas (wet or dry), Liquid Hydrocarbons, Sour Gas, Crude Oil,
Refined Gasoline's, Distillate and Condensate.
- Temperature Range: 0 F to 400 F
*Note: Melancon EAGLE - E120 series pumps are recommended for 007 Sealant Injection.
Melancon 007 is packaged in 1 lb cartridges, 10 lb cans, or 40 lb pails.
It can also be applied with a Melancon Model #14 Hydraulic Gun or 62-CT
Screw Type Gun for Cartridges.
|
|
| Melancon No. 45 Specialty Valve Lube Sealant (reduces operating torque) |
This is our latest specialty product formulated for use in extremely high pressure plug, ball or gate valves; blended to resist a wide range of applications including liquid fuels, hot distillate /condensate, liquid hydrocarbons, H2S and CO2. It will substantially reduce the operating torque on close tolerance valves. Especially High Pressure Plug Valves. Available in stick & bulk forms. It was originally formulated for High Pressure: 12,000 psi, Hot Condensate (up to 350.F)
Temperature Range: -50 F to 450 F
|
|
| Melancon No. 90 T |
EMERGENCY Valve Lube Sealant. Contains Soft Teflon® particles for sealing capability on badly worn or cut valves. Repeated use is not recommended... For last resort.
Temperature Range: -20 F to 450 F
|
|
| Melancon No. 98 EMERGENCY Valve Lube Sealant. (also meets Mil-G-6032 specs.) |
Multi-Purpose Valve Sealant. Melancon 98 contains NO Solid fillers. Excellent sealing capability for Plug, Ball & Gate valve applications. It is inhibited for H2S & C02. Available in Bulk Forms or 1 lb. Cartridges. It can be affectively injected with our E120 Air Operated Valve Lubrication pump or our 62-CT for cartridges.
Temperature Range: 15.F to 400 F
|
|
| Melancon No. 34 (replaced by Melancon No. 536) |
Valve lube sealant for H2S (sour gas) and / or CO2.
Temperature Range: -20 F to 400 F |
|
| Melancon No. 35 (Silicone Base) |
Valve lube sealant for high pressure CO2, molten sulphur, acetic anhydride & acetic acid. It also works well in Air Starting valves on Compressor Stations..
Temperature Range: -50 F to 400 F |
|
| Melancon No. 50 |
Valve Lube Sealant specially formulated for Air Starting valves on Compressor Stations.
Temperature Range: 0 F to 400 F |
| |
| Melancon No. 536 (Meets Mil-G-6032) "Grease Plug Valve, Gasoline & Oil Resistant" |
Multi-purpose valve lube sealant for Gasoline, Jet Fuel, Aviation Gasoline, Natural Gas, Organic Acids & Caustic Solutions. Inhibited for H2S (sour gas) and CO2. Formulated for Plug, Ball & Gate Valves.
Temperature Range: -40 F to 400 F |
| |
| Melancon No. 90 G |
Multi-purpose valve lube sealant. Specially formulated for API Wellhead Gate Valve bodies. Our Non-Abrasive Formula will not damage critical down-tube components on your air operated valve lubrication pumps. Designed to protect your API Wellhead valve investments. NOTE: Melancon 90HT is recommended for API-6A Slab type gate valves such as Cameron F or FC series.
Temperature Range: 0 F to 300 F |
| |
| Melancon No. 95 |
Multi-purpose hydrocarbon valve lube sealant. Designed for Natural Gas, LPG, general hydrocarbons, crude oil, gasoline, propylene, benzene, toluene, butadiene, xylene, styrene, cumene & aromatics. This product is recommended for older valves and performs well in cold weather.
Temperature Range: -20 F to 400 F
NOTE: For Extreme Cold applications Melancon 93 Arctic is recommended. - 65.F to 300.F |
| |
| Melancon No. 97 |
(Our Premium Grade Routine Valve Maintenance Product)
This specialty valve lube sealant is formulated with premium base oils & a unique sealing matrix. Services include natural gas, LPG, general hydrocarbons & aromatics.
It offers exceptional valve sealing characteristics in plug, ball & gate valve applications.
Temperature Range: -20 F to 400 F |
| |
| Melancon No. MP-3 |
Multi-purpose EP bearing lubricant (petroleum base). Available in cartridges & bulk form.
Temperature Range: -20 F to 350 F |
| |
| Melancon STG Lubricant (Year Round Protection for Valve Stem / Bearings & Gear Box) |
Valve Stem, Thread & Gear Box Lubricant for All types of valves.
Keeps stem bearings free & retards corrosion.
Packaged in 14.5 oz. cartridges (12 per Box) & Bulk Form:10#, 40# & 120#. This product is rated NLGI-2 & EP-2 Grade.
Temperature Range: -65 F to 360 F |
